Tips for Using Spoofers

If spoofers don't help, you need to perform the following steps. These recommendations are based on experience communicating with developers of expensive foreign spoofers and will help you bypass a hardware ban as effectively as possible.

Windows Reinstallation

A complete Windows reinstallation with deletion of all volumes and formatting of the disk where the system / game was installed. Based on experience communicating with developers of expensive foreign spoofers — this is a mandatory step. Don't try to simply update the system by changing the build, it's ineffective.

TPM Clear — Clear the TPM Module

Before disabling the TPM module, perform a TPM Clear operation in BIOS. This resets all stored keys and identifiers that anti-cheats use for hardware binding. After clearing — disable TPM. On different motherboards the path is: Advanced → Trusted Computing → Pending Operation → TPM Clear.

Disable Fast Boot & Hibernation

Disable Fast Boot and Hibernation mode. With every system reboot, the system will perform a full reset and RAM will be completely cleaned. This guarantees that any software on the computer was loaded 100% from scratch.

Detailed guide on disabling Fast Boot and Hibernation

Device Cleanup & Trace Removal — Tool.exe

Tool.exe is a utility for complete device cleanup and trace removal. It's in development state, but basic cleanup works. Download it, run it and follow the steps below.

Device Instance ID Preparation — DeviceInterfaceSpooferPerm.exe

DeviceInterfaceSpooferPerm.exe is a utility for spoofing Device Instance IDs. Run it before using the main spoofer for maximum effectiveness. Also available in the Free Solutions section.

Disabling Wi-Fi and Bluetooth Adapters

Disable Wi-Fi and Bluetooth adapters. If you only connect via cable, you can skip this step. It's best to disable adapters physically or through BIOS. Often they cannot be spoofed. On foreign forums, they even recommend buying new adapters and replacing them.

Changing IP Address

Change your IP address. VPN causes lag, so it's better to try methods without third-party programs. If you have a dynamic IP — just restart your router. If it's static — call your ISP and request a change.

Removing External Drives

Remove all external drives — flash drives, HDDs, SSDs. Even such drives can leave traces that the anti-cheat reads.

Clearing CMOS

Clear CMOS (reset BIOS). This helps remove saved hardware data. Usually it's enough to remove the battery from the motherboard for a few minutes or use a jumper.

Checking Disk Serial Numbers

Check the serial numbers of hard drives and SSDs. Anti-cheats record them. You can try reflashing the drive, replacing it, or connecting a different one.

Changing the Network Card

Change the network card. If you have a desktop PC, purchase a new PCI-E or USB network adapter. This reduces the risk of detection.

Changing MAC Address

Change the MAC address. This is done through the network card settings or special utilities. Sometimes it helps avoid hardware-based binding.

Checking Peripherals

Check and replace peripherals. There have been cases where the anti-cheat read data from mice, keyboards, or even monitors. This is rare, but shouldn't be ruled out.

Changing the Installation Drive

Change the drive where you install Windows and the game. Especially if the old drive was previously used with banned accounts.

Deleting Cache

Delete the anti-cheat and game cache. Some anti-cheats save unique fingerprints even outside the system.

New Windows Account

Use new Windows accounts. Sometimes it helps to create a "clean" user without traces of previous launches.

General Tips

Use old verified accounts, update BIOS to the latest version.